Build Your Own Twin-Turbine Mini Hydroelectric Dam in Your Garden
Ever wanted to make your own garden hydroelectric dam.
If the video player is not working, you can click on this alternative video link.
Like dams? Want a little one in your garden? Then follow this simple guide to find out how to make one.
As you can imagine, you'll need some tools and materials before you get started.
Materials and gear needed
- Quikrete cement mix and sand
- Reclaimed or old bricks
- Scrap wood
- Scrap uPVC piping, elbows, and funnels
- Motors for sluice gats
- Recruit a dog supervisor
With all your gear in hand, it is time to get on with this great little build.
Step 1: Prepare the ground
The very first step, after you've chosen a suitable location, is to break ground. Build a trench, and excavate the area where the dam will be built within the trench as shown in the video.
With that done, mix up your cement mixture as needed, and begin to lay the foundations for the main dam structure. Next, take your bricks and begin to lay several courses of bricks to build the main dam structure.
Be sure to add a length of plastic pipe to form an opening for the overflow lower sluice of the dam within the first course of bricks. Also, ensure you leave two gaps on either side of the dam for the main hydro generator-sluices.
Step 2: Mark out the position of hydro-generators
With the dam mainly finished, you can now begin to build the main hydro-generator structures. Mark out the position of each of the two in front of the dam as shown in the video. Excavate holes as shown, and insert the lengths of uPVC pipe and plastic funnels as shown.
Cement the piping into place.
With that done, line the route of the sluice ramps and wells will small pieces of brick or cinder block to form walls. Once complete, skim all exposed surfaces of masonry with cement.
With that done, complete the stepped cement structures between the sluices and downstream of the dam. Once done, skim the entire main dam structure too.
Once done, leave the cement to fully cure.
Step 3: Build the sluice gates
Next, take some lengths of metal or wood and build the frames for the main sluice gates to the dam. Cement into place as needed.
Next, build the sluice gate structures using scrap metal rods and sheet metal. Weld together as needed.
Install the flood gates into their frames as shown. With that done, install a pair of motors to the tops of the sluice gates to enable remote opening and closing of the gates.
With that done, add an elbow and length of uPVC piping to the lower sluice gate. Next, make a housing for the motor controls, and install it on one side of the dam.
Next, take various colors of paint, and decorate the main dam structure as needed. In this case, the main dam structure is white, and trimmings red.
You can decorate the dam as you see fit.
Step 4: Make the hydro-generators
Next, take some more lengths of uPVC piping. Cut, flatten, etc, to make the main hydro-generator impellors as shown in the video.
Once ready, paint them to match the dam as needed. With that done, mount them to a wooden holder, and install a dynamo on each impeller.
Install the complete generators into the wells of each hydro-generator sluice.
With that done, rig up a series of pylons, and wire up the dynamos to the pylons as shown.
Next, run the wires and pylons from the generators to where you need the power to be transferred - in this case, a series of lights at the top of the dam and sides of the trench in front of the dam.
With that done, you can now fill the main reservoir of the dam as needed.
Congratulations, your mini dam is now finally complete. Now all you need to do is open the sluice gates, and watch your little creation come to life!
If you enjoyed this little project, you might enjoy making another miniature dam?
Interesting Engineering is a participant of the Amazon Services LLC Associates Program and various other affiliate programs, and as such there might be affiliate links to the products in this article. By clicking the links and shopping at partner sites, you do not only get the materials you need but also are supporting our website.