Modify Your Stock Motorbike Exhaust with This Simple Guide
It turns out you can modify your existing motorbike exhaust fairly easily.
Fed up with your stock exhaust on your motorbike? Then why not consider modifying the existing exhaust to something with a little more oomph?
If this sounds of interest, then follow this simple guide to finding out how.
As you can imagine, you'll need some tools and materials before you get started.
The best picks that will help you do the job
- Various engine maintenance tools
- CO-Z Stepper drill bit
- Dekopro welding gear and safety equipment
- Non-toxic fibrous insulation sheets
- Angle grinder
- Varying diameters of steel pipe
Step 1: Remove the old exhaust
The first step is to remove the old exhaust from the bike in preparation for your new one. The tools you need and the process will vary depending on the design of your bike, so complete accordingly.
However, you'll likely need a mixture of tools to get the job done like hex keys, ratchets, and screwdrivers. You may also need to remove some bodywork before you can get to the actual parts too.
Once all the flanges and other mountings and fixings for the exhaust have been removed, gently remove the exhaust and manifold as needed.
Step 2: Modify the old exhaust as needed
The next step is to begin the modification process for the new exhaust. Cut off the old manifold using something like an angle grinder as shown in the video.
Use your angle grinder to also open up the backbox to expose the parts within. Once done, separate the parts as shown in the video.
With that done, take some metal piping and cut it into lengths using your angle grinder. Once done, drill a series of holes through the pipe using a stepped drill bit.
Next, take another length of a smaller bore pipe and cut one end at an angle to make the new exhaust pipe.
With that done, assemble the new pieces inside the backbox as shown and weld together as needed.
Step 3: Rebuild the backbox and install
With the new exhaust pipe now complete, and if not already complete, install the pipe as needed inside the backbox housing. Then weld the new exhaust piping assembly to the backbox as required.
With that done, take your insulation padding and cut it into strips as shown in the video. Wrap the sheeting around the exhaust pipe as if you were lagging a pipe.
Secure the insulation into place using lengths of steel wire.
Once complete, cut the rest of the insulation into medium-sized squares and pad out the inside of the backbox on either side of the exhaust pipe.
With that complete, take the other half of the backbox and close up the exhaust pipe and insulation as shown.
Then, weld the backbox back together as needed.
Once the welds are complete, clean them up using your angle grinder as needed. Take your time here as you want it to look nice when the exhaust is reinstalled on your pride and joy.
With that, clean and polish the chrome/steel parts of the exhaust to make it look as good as new.
Once done, your new exhaust is ready to install back on your bike.
Reverse the process you did when removing the exhaust as needed. Reattach any other body parts you needed to remove too.
Once done, your new bike exhaust is basically good to go!
Fire up the bike and take it for a spin.
If you enjoyed this quick little DIY build, you might enjoy some other metalworking projects.
How about, for example, making your own Darth Vader-themed barbeque?
Interesting Engineering is a participant of the Amazon Services LLC Associates Program and various other affiliate programs, and as such there might be affiliate links to the products in this article. By clicking the links and shopping at partner sites, you do not only get the materials you need but also are supporting our website.